bzt52-g-series www.vishay.com vishay semiconductors rev. 1.3, 27-feb-13 1 document number: 83340 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 small signal zener diodes features ? silicon planar power zener diodes ? the zener voltages are graded according to the international e24 standard ? aec-q101 qualified ? esd capability according to aec-q101: human body model > 8 kv machine model > 800 v ? base p/n-g3 - green, commercial grade ? material categorization: for definitions of co mpliance please see www.vishay.com/doc?99912 primary characteristics parameter value unit v z range nom. 2.4 to 75 v test current i zt 2.5; 5 ma v z specification pulse current int. construction single ordering information device name ordering code taped units per reel minimum order quantity bzt52-g-series bzt52c2v4-g3-08 to bzt52c75-g3-08 3000 (8 mm tape on 7" reel) 15 000/box bzt52b2v4-g3-08 to BZT52B75-G3-08 bzt52c2v4-g3-18 to bzt52c75-g3-18 10 000 (8 mm tape on 13" reel) 10 000/box bzt52b2v4-g3-18 to BZT52B75-G3-18 package package name weight molding compound flammability rating moisture sensitivity level soldering conditions sod-123 9.4 mg ul 94 v-0 msl level 1 (according j-std-020) 260 c/10 s at terminals absolute maximum ratings (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit power dissipation diode on ceramic substrate 0.7 mm; 5 mm 2 pad areas p tot 500 mw diode on ceramic substrate 0.7 mm; 2.5 mm 2 pad areas p tot 410 mw zener current see table electrical characteristics thermal resistance junction to ambient air valid provided that electrodes are kept at ambient temperature r thja 300 k/w junction temperature t j 150 c storage temperature range t stg - 65 to + 150 c operating temperature range t op - 55 to + 150 c
bzt52-g-series www.vishay.com vishay semiconductors rev. 1.3, 27-feb-13 2 document number: 83340 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes ?i zt1 = 5 ma, i zt2 = 1 ma (1) measured with pulses t p = 5 ms (2) i zt1 = 2.5 ma (3) i zt2 = 0.5 ma (4) valid provided that electrodes are kept at ambient temperature electrical characteristics (t amb = 25 c, unless otherwise specified) part number marking code zener voltage range (1) test current reverse voltage dynamic resistance temp. coefficient admissable zener current (4) v z at i zt1 i zt1 i zt2 v r at i r z z at i zt1 z zk at i zt2 ? vz i z at t amb = 45 c i z at t amb = 25 c v ma v na ? 10 -4 /c ma min. nom. max. bzt52c2v4-g y1 2.2 2.4 2.6 5 1 - 100 85 600 - 9 to - 4 - - bzt52c2v7-g y2 2.5 2.7 2.9 5 1 - 100 75 (< 83) < 500 - 9 to - 4 113 134 bzt52c3v0-g y3 2.8 3.0 3.2 5 1 - 100 80 (< 95) < 500 - 9 to - 3 98 118 bzt52c3v3-g y4 3.1 3.3 3.5 5 1 - 100 80 (< 95) < 500 - 8 to - 3 92 109 bzt52c3v6-g y5 3.4 3.6 3.8 5 1 - 100 80 (< 95) < 500 - 8 to - 3 85 100 bzt52c3v9-g y6 3.7 3.9 4.1 5 1 - 100 80 (< 95) < 500 - 7 to - 3 77 92 bzt52c4v3-g y7 4 4.3 4.6 5 1 - 100 80 (< 95) < 500 - 6 to - 1 71 84 bzt52c4v7-g y8 4.4 4.7 5 5 1 - 100 70 (< 78) < 500 - 5 to + 2 64 76 bzt52c5v1-g y9 4.8 5.1 5.4 5 1 > 0.8 100 30 (< 60) < 480 - 3 to + 4 56 67 bzt52c5v6-g ya 5.2 5.6 6 5 1 > 1 100 10 (< 40) < 400 - 2 to + 6 50 59 bzt52c6v2-g yb 5.8 6.2 6.6 5 1 > 2 100 4.8 (< 10) < 200 - 1 to + 7 45 54 bzt52c6v8-g yc 6.4 6.8 7.2 5 1 > 3 100 4.5 (< 8) < 150 + 2 to + 7 41 49 bzt52c7v5-g yd 7 7.5 7.9 5 1 > 5 100 4 (< 7) < 50 + 3 to + 7 37 44 bzt52c8v2-g ye 7.7 8.2 8.7 5 1 > 6 100 4.5 (< 7) < 50 + 4 to + 7 34 40 bzt52c9v1-g yf 8.5 9.1 9.6 5 1 > 7 100 4.8 (< 10) < 50 + 5 to + 8 30 36 bzt52c10-g yg 9.4 10 10.6 5 1 > 7.5 100 5.2 (< 15) < 70 + 5 to + 8 28 33 bzt52c11-g yh 10.4 11 11.6 5 1 > 8.5 100 6 (< 20) < 70 + 5 to + 9 25 30 bzt52c12-g yi 11.4 12 12.7 5 1 > 9 100 7 (< 20) < 90 + 6 to + 9 23 28 bzt52c13-g yk 12.4 13 14.1 5 1 > 10 100 9 (< 25) < 110 + 7 to + 9 21 25 bzt52c15-g yl 13.8 15 15.6 5 1 > 11 100 11 (< 30) < 110 + 7 to + 9 19 23 bzt52c16-g ym 15.3 16 17.1 5 1 > 12 100 13 (< 40) < 170 + 8 to + 9.5 17 20 bzt52c18-g yn 16.8 18 19.1 5 1 > 14 100 18 (< 50) < 170 + 8 to + 9.5 15 18 bzt52c20-g yo 18.8 20 21.2 5 1 > 15 100 20 (< 50) < 220 + 8 to + 10 14 17 bzt52c22-g yp 20.8 22 23.3 5 1 > 17 100 25 (< 55) < 220 + 8 to + 10 13 16 bzt52c24-g yr 22.8 24 25.6 5 1 > 18 100 28 (< 80) < 220 + 8 to + 10 11 13 bzt52c27-g ys 25.1 27 28.9 5 1 > 20 100 30 (< 80) < 250 + 8 to + 10 10 12 bzt52c30-g yt 28 30 32 5 1 > 22.5 100 35 (< 80) < 250 + 8 to + 10 9 10 bzt52c33-g yu 31 33 35 5 1 > 25 100 40 (< 80) < 250 + 8 to + 10 8 9 bzt52c36-g yw 34 36 38 5 1 > 27 100 40 (< 90) < 250 + 8 to + 10 8 9 bzt52c39-g yx 37 39 41 5 1 > 29 100 50 (< 90) < 300 + 10 to + 12 7 8 bzt52c43-g yy 40 43 46 5 1 > 32 100 60 (< 100) < 700 + 10 to + 12 6 7 bzt52c47-g yz 44 47 50 5 1 > 35 100 70 (< 100) < 750 + 10 to + 12 5 6 bzt52c51-g z1 48 51 54 5 1 > 38 100 70 (< 100) < 750 + 10 to + 12 5 6 bzt52c56-g z2 52 56 60 2.5 1 - 100 < 135 (2) < 1000 (3) typ. + 10 (2) -- bzt52c62-g z3 58 62 66 2.5 1 - 100 < 150 (2) < 1000 (3) typ. + 10 (2) -- bzt52c68-g z4 64 68 72 2.5 1 - 100 < 200 (2) < 1000 (3) typ. + 10 (2) -- bzt52c75-g z5 70 75 79 2.5 1 - 100 < 250 (2) < 1000 (3) typ. + 10 (2) --
bzt52-g-series www.vishay.com vishay semiconductors rev. 1.3, 27-feb-13 3 document number: 83340 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes ?i zt1 = 5 ma, i zt2 = 1 ma (1) measured with pulses t p = 5 ms (2) i zt1 = 2.5 ma (3) i zt2 = 0.5 ma (4) valid provided that electrodes are kept at ambient temperature electrical characteristics (t amb = 25 c, unless otherwise specified) part number marking code zener voltage range (1) test current reverse voltage dynamic resistance temp. coefficient admissable zener current (4) v z at i zt1 i zt1 i zt2 v r at i r z z at i zt1 z zk at i zt2 ? vz i z at t amb = 45 c i z at t amb = 25 c v ma v na ? 10 -4 /c ma min. nom. max. bzt52b2v4-g v1 2.35 2.4 2.45 5 1 - 100 85 600 - 9 to - 4 - - bzt52b2v7-g v2 2.65 2.7 2.75 5 1 - 100 75 (< 83) < 500 - 9 to - 4 113 134 bzt52b3v0-g v3 2.94 3.0 3.06 5 1 - 100 80 (< 95) < 500 - 9 to - 3 98 118 bzt52b3v3-g v4 3.23 3.3 3.37 5 1 - 100 80 (< 95) < 500 - 8 to - 3 92 109 bzt52b3v6-g v5 3.53 3.6 3.67 5 1 - 100 80 (< 95) < 500 - 8 to - 3 85 100 bzt52b3v9-g v6 3.82 3.9 3.98 5 1 - 100 80 (< 95) < 500 - 7 to - 3 77 92 bzt52b4v3-g v7 4.21 4.3 4.39 5 1 - 100 80 (< 95) < 500 - 6 to - 1 71 84 bzt52b4v7-g v8 4.61 4.7 4.79 5 1 - 100 70 (< 78) < 500 - 5 to + 2 64 76 bzt52b5v1-g v9 5 5.1 5.2 5 1 > 0.8 100 30 (< 60) < 480 - 3 to + 4 56 67 bzt52b5v6-g va 5.49 5.6 5.71 5 1 > 1 100 10 (< 40) < 400 - 2 to + 6 50 59 bzt52b6v2-g vb 6.08 6.2 6.32 5 1 > 2 100 4.8 (< 10) < 200 - 1 to + 7 45 54 bzt52b6v8-g vc 6.66 6.8 6.94 5 1 > 3 100 4.5 (< 8) < 150 + 2 to + 7 41 49 bzt52b7v5-g vd 7.35 7.5 7.65 5 1 > 5 100 4 (< 7) < 50 + 3 to + 7 37 44 bzt52b8v2-g ve 8.04 8.2 8.36 5 1 > 6 100 4.5 (< 7) < 50 + 4 to + 7 34 40 bzt52b9v1-g vf 8.92 9.1 9.28 5 1 > 7 100 4.8 (< 10) < 50 + 5 to + 8 30 36 bzt52b10-g vg 9.8 10 10.2 5 1 > 7.5 100 5.2 (< 15) < 70 + 5 to + 8 28 33 bzt52b11-g vh 10.8 11 11.2 5 1 > 8.5 100 6 (< 20) < 70 + 5 to + 9 25 30 bzt52b12-g vi 11.8 12 12.2 5 1 > 9 100 7 (< 20) < 90 + 6 to + 9 23 28 bzt52b13-g vk 12.7 13 13.3 5 1 > 10 100 9 (< 25) < 110 + 7 to + 9 21 25 bzt52b15-g vl 14.7 15 15.3 5 1 > 11 100 11 (< 30) < 110 + 7 to + 9 19 23 bzt52b16-g vm 15.7 16 16.3 5 1 > 12 100 13 (< 40) < 170 + 8 to + 9.5 17 20 bzt52b18-g vn 17.6 18 18.4 5 1 > 14 100 18 (< 50) < 170 + 8 to + 9.5 15 18 bzt52b20-g vo 19.6 20 20.4 5 1 > 15 100 20 (< 50) < 220 + 8 to + 10 14 17 bzt52b22-g vp 21.6 22 22.4 5 1 > 17 100 25 (< 55) < 220 + 8 to + 10 13 16 bzt52b24-g vr 23.5 24 24.5 5 1 > 18 100 28 (< 80) < 220 + 8 to + 10 11 13 bzt52b27-g vs 26.5 27 27.5 5 1 > 20 100 30 (< 80) < 250 + 8 to + 10 10 12 bzt52b30-g vt 29.4 30 30.6 5 1 > 22.5 100 35 (< 80) < 250 + 8 to + 10 9 10 bzt52b33-g vu 32.3 33 33.7 5 1 > 25 100 40 (< 80) < 250 + 8 to + 10 8 9 bzt52b36-g vw 35.3 36 36.7 5 1 > 27 100 40 (< 90) < 250 + 8 to + 10 8 9 bzt52b39-g vx 38.2 39 39.8 5 1 > 29 100 50 (< 90) < 300 + 10 to + 12 7 8 bzt52b43-g vy 42.1 43 43.9 5 1 > 32 100 60 (< 100) < 700 + 10 to + 12 6 7 bzt52b47-g vz 46.1 47 47.9 5 1 > 35 100 70 (< 100) < 750 + 10 to + 12 5 6 bzt52b51-g u1 50 51 52 5 1 > 38 100 70 (< 100) < 750 + 10 to + 12 5 6 bzt52b56-g u2 54.9 56 57.1 2.5 1 - 100 < 135 (2) < 1000 (3) typ. + 10 (2) -- bzt52b62-g u3 60.8 62 63.2 2.5 1 - 100 < 150 (2) < 1000 (3) typ. + 10 ( 2) -- bzt52b68-g u4 66.6 68 69.4 2.5 1 - 100 < 200 (2) < 1000 (3) typ. + 10 (2) -- BZT52B75-G u5 73.5 75 76.5 2.5 1 - 100 < 250 (2)) < 1500 (3) typ. + 10 (2) --
bzt52-g-series www.vishay.com vishay semiconductors rev. 1.3, 27-feb-13 4 document number: 83340 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - forward characteristics fig. 2 - admissible power dissipati on vs. ambient temperature fig. 3 - dynamic resistance vs. zener current fig. 4 - dynamic resistance vs. zener current fig. 5 - dynamic resistance vs. zener current fig. 6 - thermal differential resistance vs. zener voltage 18114 ma 10 3 10 2 10 -1 10 -2 10 -3 10 -4 10 -5 10 1 i f v f 0 0.2 0.4 0.6 0.8 1 v t j = 100 c t j = 25 c 18888 500 400 300 200 100 0 mw p tot 200 100 0c t am b 18117 1000 5 4 3 2 5 4 3 2 100 1 r zj 0.1 25 25 110 i z t j = 25 c 2.7 5 4 3 2 10 25 100 ma 3.6 4.7 5.1 5.6 18119 100 5 4 3 2 5 4 3 2 10 r zj 0.1 25 25 110 i z 1 25 100 ma t j = 25 c 33 27 22 18 15 12 10 6.8/8.2 6.2 18120 10 3 7 5 4 3 2 7 5 4 3 2 10 0.1 2345 2345 110 ma r zj i z t j = 25 c 47 + 51 43 39 36 10 2 18121 10 3 5 4 3 2 5 4 3 2 10 2 1 r zth 5 4 3 2 10 1 2345 2345 10 100 v v z at i z = 5 ma negati v e positi v e v z t j r zth = r tha x v z x
bzt52-g-series www.vishay.com vishay semiconductors rev. 1.3, 27-feb-13 5 document number: 83340 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 7 - dynamic resistance vs. zener voltage fig. 8 - temperature dependence of zener voltage vs. zener voltage fig. 9 - change of zener voltage vs. junction temperature fig. 10 - temperature dependence of zener voltage vs. zener voltage fig. 11 - change of zener voltage vs. junction temperature fig. 12 - change of zener voltage from turn-on up to the point of thermal equilibrium vs. zener voltage 18122 100 7 5 4 3 2 7 5 4 3 2 1 r zj 10 t j = 25 c i z = 5 ma 1 2345 2345 10 100 v v z 18135 25 20 15 10 5 0 - 5 m v /c v z t j 1 2345 2345 10 100 v v z at i z = 5 ma v 27 v , i = 2 ma 5 ma 1 ma 20 ma i z = 18124 v z at i z = 5 ma 25 15 10 8 7 6.2 5.9 5.6 5.1 4.7 3.6 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 - 1 - 0.2 v z v t j 020406080 100 120 140 c 100 80 60 40 20 0 m v /c v z t j 0 20 40 80 60 100 v v z at i z = 2 ma i z = 5 ma 18158 0 20 40 60 80 100 120 140 c 9 8 7 6 5 4 3 2 1 0 - 1 v v z at i z = 5 ma i z = 5 ma v z t j 51 43 36 v 18159 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 - 0.2 - 0.4 1 10 100 v v z v z at i z = 5 ma v z = r zth x i z i z = 5 ma v z >= 56 v; i z = 2.5 ma
bzt52-g-series www.vishay.com vishay semiconductors rev. 1.3, 27-feb-13 6 document number: 83340 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 13 - change of zener voltage from turn-on up to the point of thermal equilibrium vs. zener voltage fig. 14 - breakdown characteristics fig. 15 - breakdown characteristics fig. 16 - breakdown characteristics 18160 5 4 3 2 1 0 v v z 0 20 40 60 80 100 v v z at i z = 5 ma i z = 5 ma i z = 2.5 ma v z = r zth x i z u rrent i z 5 ma 1 23456789 0 10 v v z 3.3 3.9 5.6 2.7 ma 50 40 30 20 10 0 l z t j = 25 c 8.2 6.8 4.7 18112 10 20 30 0 40 v v z ma 30 20 10 0 l z 33 test c u rrent i z 5 ma t j = 25 c 10 12 15 18 22 27 36 18157
bzt52-g-series www.vishay.com vishay semiconductors rev. 1.3, 27-feb-13 7 document number: 83340 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters (inches): sod-123 0.1 (0.004) max. 2.85 (0.112) 2.55 (0.100) 3.85 (0.152) 3.55 (0.140) 1.7 (0.067) 1.40 (0.055) mo u nting pad layo u t 2.5 (0.098) 0.85 (0.033) 0.85 (0.033) 0.85 (0.033) cathode b ar 0.65 (0.026) 0.45 (0.018) 0.10 (0.004) 1 (0.039) 0.15 (0.006) 1.35 (0.053) 0.2 (0.008) 0 to 8 0.45 (0.018) 0.25 (0.010) 0.5 (0.020) ref. re v . 4 - date: 24. sep. 2009 doc u ment no.: s8- v -3910.01-001 (4) 17432
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
